Curtains Up® now offers hand draw traverse rods in 1” and 1.5” diameter, for those challenging installations where an unobstructed flow of curtains is needed. Using top mounted brackets you can now install lengths of 8’ or more without brackets interfering with the curtain flow. Top mounted brackets are first attached to the wall. Then the traverse rod is connected by tightening the Hex head screw (key supplied) to lock the rod in place. Rods can be connected for greater length when needed. A fling rod is recommended for use with these new glides and master carriers for ease of operation and minimum curtain wear. A large roller glide is suggested for the 1.5” diameter rod as it easily handles heavier treatments. A smaller nylon glide fits with both size rods for use with lighter weight curtains. Master carriers with either overlap or standard arms are available. The direction of each arm is adjustable to either a left or right orientation. Curtains Up® finials that fit over 1”or 1.5” diameter rods will lock onto the new traverse rods. If a screw-in finial is selected, simply install the plastic plug into the end of the 1.5” traverse rods. Please note that screw-in finials are not offered for 1” diameter rods. End stops are available to hold the curtains in position at either end of the traverse rod.Hand draw traverse rods are available for most Curtains Up® painted finishes. See distributor list.

Download PDF page